best free magento theme

Skip to Main Content »

Your shopping cart is empty

Lumenier TX5G25C Mini Cased 25mW 5.8GHz FPV Transmitter with Raceband

Be the first to review this product

In stock

Only 1 left

Regular Price: $34.99

Special Price $29.99

OR

Quick Overview

The Lumenier TX5G25C Mini cased VTX is a light weight 25mW 5.8GHz FPV Racing Transmitter.

Lumenier TX5G25C Mini Cased 25mW 5.8GHz FPV Transmitter with Raceband

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The Lumenier TX5G25C Mini Cased 25mW 5.8GHz 32CH FPV video transmitter is the perfect VTX for FPV racing! The lower 25mW transmission power means more pilots can fly together without overpowering each other on close frequencies. This 25mW transmitter is housed in a protective aluminum case, making it super restitant to being damaged during a crash. The TX5G25C has 32 channels including the new Raceband frequencies. Our friends from ImmersionRC first divided the 5.8 band into 8 channels evenly spread out 37MHz from each other, which allows more racers flying at the same time on the same band. Lumenier Raceband transmitters are fully compatible with FatShark and ImmersionRC receivers. The Tx includes a 5v output to power FPV cameras and an on-board microphone to transmit audio to your receiver.

The TX5G25C features an easy to use single button, LED interface. It also comes with a clean pre-wired harness, and only weighs 9g! It stays cool to the touch during operation, so you don't have to worry about it overheating in a crash.

Note: The silk screen print of the pins are incorrect, (-+AV-). They should match the cable color which is (+-V-+) 7-19v input, ground, video input, ground, 5v output.

Features

  • 32 channels: Cover F, E, A bands and R (Raceband) bands
  • Intuitive and easy to use button and LEDs for frequency selection
  • Small sized and light weight
  • Transmitter frequency: 5658-5925MHz with 25mW power output
  • Transmitting distance >  500m (open area)
  • SMA Antenna connector
  • Dimensions: 32*22*9mm (not including SMA adapter)

Specifications:

  • Operating Voltage: 7 - 19V
  • Supply current: 50 mA
  • Operating Temperature: -10 +85 C
  • Video Band Width: 5-6 MHz
  • Audio carrier Frequency: 6.5 MHz
  • Video Input Level: 0.8,1.0,1.2 Vp-p
  • Video Input Impedance: 75 Ohm
  • Weight: 9g (without antenna)
  • Antenna Connector:SMA Female Connector
  • Video Format: NTSC/PAL
  • Frequency Selection: Single push to change CH, push and hold for 2 seconds to change FR

Frequency and channel frequency table:

Frequency Table

Compatible with Fatshark, ImmersionRC Boscam, Foxtech and other generic branded FPV receivers within the same frequency range.

Included

  • 1 x transmitting unit (VTX) TX5G25C
  • 1 x antennas (2db)
  • 1 x power/video cable 
    • Locking connector, female JST for voltage in, female servo plug for video and 5v out.

*Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty. Mount the VTX in an area with good air cooling.

FPV Regulatory Notice

The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licensesIt is your responsibility to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.