The store will be shutdown until 10/16/2017.
Any order placed will be shipped no later than 10/16/2017.
best free magento theme

Skip to Main Content »

Your shopping cart is empty

Micro MinimOSD

Be the first to review this product

In stock

Regular Price: $9.99

Special Price $8.99

  • Buy 2 for $8.00 each and save 12%
OR

Quick Overview

The Micro MinimOSD is the next evolution of minimization.

Micro MinimOSD

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

The Micro MinimOSD is the next evolution of minimization. The Minimosd was engineered to bring users a very powerfull OSD at a unreal cost. After all the community mods, we re-engineered the OSD so every useable pin was easy available (no more surface soldering). All your requests have now envoled into the Micro MinimOSD! With all the features of the very popuar WiteSpy KV Team modded OSD but in a 15x15MM size. The only differenece is that It does NOT have the DC/DC converter. This means less heat when powered off a Flight controller. The Micro MinimOSD is the same as the older MinimOSD hardware, but has been modified to take advantage of custom firmware options. You can choose firmware that is MAVLink compatible for ArduCopter, or MultiWii Serial compatible for MultiWii and Baseflight/Cleanflight control boards. You can connect two batteries up to 4S so you can see the main flight battery voltage.  the second port will allow your FPV battery voltage on the display as well. we also did not forget about the pin for analog or digital PWM RSSI and a connection where you can attach a current sensor.

Features:

  • All the same features as the orignal, but less than half of the size
  • No DC/DC converter. Power board via 5 volts
  • FTDI cable compatible pinout
  • Standard 6-pin ISP header
  • Two LED indicators
  • ATmega328P with Arduino bootloader
  • MAX7456 monochrome on-screen display
  • 16x16MM Size
  • Modifications for direct connection of two batteries (up to 4S)
  • Pad for an Analog or Digital PWM RSSI signal
  • Pad for the connection of a Current Sensor
  • ATmega328P with Arduino bootloader
  • Standalone or with APM/ Flip / Flip32+ flight controllers
  • Modifications allow direct connection of two batteries (up to 4S)
  • Big thank you to the KV Team and the OSD firmware and the multiwii-osd team
  • This hardware takes the hardware mods for this firmware, and builds them into an RTF solution.
  • This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod .

 

Specifications:

  • ATmega328P with Arduino bootloader
  • MAX7456 monochrome on-screen display
  • FTDI cable compatible pinout
  • Standard 6-pin ISP header
  • Two independent power sections with an LED indicator on each
  • Solder jumpers for combining the power sections
  • +5V 500mA regulator for up to +12V supply input
  • Solder jumper for PAL video option
  • Exposed test points for HSYNC and LOS
  • Dimensions: 0.7"W x 1.7"L (2.4" w/ pins as shown) x 0.3"H
  • MINIMOSD, A MINIMAL ARDUINO-BASED ON-SCREEN DISPLAY BOARD.

 

Includes:

  • 1x Micro Minim OSD board
  • 1x 6 pin straight header
  • 1x 6 pin 90 degree header
  • 1x 4 pin 90 degree header
  • 1x 2 pin 90 degree header

 

Note:

  • This OSD does not support voltage detection with a CC3D, only with a NAZE32.
  • FTDI needed to configure and use
 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

The store will be shutdown until 10/16/2017.
Any order placed will be shipped no later than 10/16/2017.